Cisco Systems WRT54G3G-ST manual Configure Wireless Security Settings WEP 64-Bit

Wireless-G Router for Mobile Broadband

WEP (64-Bit)

Enter a passphrase or WEP key.

Passphrase - Enter a passphrase, and then click the Generate button, so a WEP key is automatically generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (For any non-Linksys wireless products, enter the WEP key manually on those products.)

Key 1 - The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Click the Next button.

Figure 7-20: Configure Wireless Security Settings - WEP

(64-Bit)

16.The Setup Wizard will ask you to review your settings before it saves them. Click the Yes button if you are satisfied with your settings, or click the No button if you do not want to save your new settings.

Figure 7-21: Configure Wireless Security Settings - WEP

(64-Bit)

Chapter 7: Setting up the Wireless-G Router for Broadband WAN and Mobile Broadband Ser- 50

vice