Exit or Prev, If no change is required press Exit or Prev to return to the previous Length Screen.
Raise will increase the number by 1. The key can be pressed once for each increment of 1 required or held down to scroll up. Releasing the key will freeze the preset at the last value then press enter.
Lower will decrease the preset by 1. The key can be pressed once for each decrement of 1 required or held down to scroll down. Releasing the key will freeze the preset at the last value then press enter.
Numeric keys
Key in the number required and press enter. If you require 4 presets key in 4 and then press enter.
Enter or Delete?
If the keyed in number is correct press the enter key for it to be accepted and return to the Main Timer Mode screen. If it is wrong press the delete key and the previous preset will reappear.
CONTROL
INSTRUCTIONS
PRESET TO
RUN SCREEN
CONTINUED
TIME SCREEN
By pressing the soft key located under the word Time on the Main TimerTIMEMode00000ExitScreen,.000secthe preset for the timer is avail- able. Additional information on how to access this screen can be found in the operator display overview in Appendix E of this manual.
The number shown is the current time preset value, i.e. the time interval to cut the product. A cursor will appear in the least significant digit. The user has a choice of ways to adjust this number.
Exit or Prev, If no change is required press Exit or Prev to return to the Main Timer Mode Screen.
CONTROL
INSTRUCTIONS
TIME SCREEN
Continued
UGE059/1003 | OPERATION |
