CONTROL
INSTRUCTIONS
Menu function key is used to access the Menu Area. This area can only be accessed from the main display screen for each mode. See the Menu Area section for more
information.
Parts TotalSelectSELECTAreaExitPARTSScreenAREABatch
Under the current mode on the left side of the bottom line of the display is a soft key labeled Parts. Pressing this key accesses the Parts Select Screen.
This screen provides access to the parts Total/softkey1 or Batch/softkey3 areas. Pressing Exit/softkey2 returns the dis- play to the active main screen. If no selection is made within 30 seconds the display returns to the active main screen.
EXIT or PREV, fixed function keys return the display to the previous screen.
CONTROL
INSTRUCTIONS
TOTAL
SCREEN
Continued
TOTAL SCREEN
By pressingTOTAL0,000,000softkey1 locatedpcs.under the word Total on the Parts Select Screen,Off a
This is typically used to count cut pieces during the day or days that the product is being produced. Sample or manual cuts are not counted. When enabled the count continues to accumulate even if the total display is not being viewed. It is also possible to turn this counter off or on.
On/Off Softkey1
Under the counter on the left is a soft key labeled On or Off. Pressing this key while On is displayed will disable the counter. Likewise pressing this key while Off is displayed enables the counter.
Exit Softkey2
Under the counter, in the center is a soft key labeled Exit. Pressing this key will return the display to the Parts Select screen.
OPERATION | UGE059/1003 |
