Numeric keys
Key in the batch required and press enter. If you require a batch of 50 parts you must key in 50 and then press enter.
Enter or Delete?
If the keyed in number is correct press the enter key for it to be accepted and return to the Main screen. If it is wrong press the delete key and the previous preset will reappear.
Batch Pre-Alarm Preset Screen
By pressing the soft key located under the word Alarm on the Batch Area Screen, the pre et for the Batch
CONTROL
INSTRUCTIONS
BATCH
SCREEN
CONTINUED
ALARM000,00Exit0pcs
The number shown is the current alarm preset. A cursor will appear in the least significant digit. The user has a choice of ways to adjust this number. See entering the batch preset above. Please note: This value must be less than the batch preset.
Exit or Prev, if no change is required press Exit or Prev to return to the Main screen.
LENGTH SCREEN
By pressing the soft key located under the word Length on the Encoder, Follower or Auto Mode Main Screen, the preset for the Length coun er is available. Additional information on how to access this screen can be found in the operator dis- play overview in Appendix E of this manual.
LENGTH#1Exit0000.000#Prstin.
The number shown is the current length preset value, i.e. the length to cut the product. A cursor will appear in the least significant digit. The user has a choice of ways to adjust this number. Pressing the #Prst/Softkey3 accesses the number of presets to run screen. This feature is only available with the multiple preset/batch option.
CONTROL
INSTRUCTIONS
LENGTH
SCREEN
Continued
UGE059/1003 | OPERATION |
