Conair SC-5 Checking The Alignment Of The Bushings, Checking the Alignment of bushing to blade

Checking the Alignment of bushing to blade

Once you are sure that the blade will easily clear the bush- ings as it goes through the space you should then make some test cuts to insure quality.

1	Close the safety cover.
	Turn on the Power (Rotary main disconnect).
2
	Press the Green start button.
3
	Do several test cuts by pressing the manual
4
	cut button.
	Check the quality of the cuts. Adjust the bush-
5
	ing if necessary.

CHECKING THE

ALIGNMENT OF

THE BUSHINGS

For more information about setting and adjusting the gap for the bushings, see About Cutter Bushings in the Appendix C.

UGE059/1003 SC-5 SURE CUT Servo Knife Cutter INSTALLATION 3-11