Datalogic Scanning I GD4100 manual Label ID Pre-loaded Sets

Label ID

Label ID

A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01- 0xFF), used to identify a barcode (symbology) type. It can be appended previous to or following the transmitted barcode data depending upon how this option is enabled. This feature provides options for configuring custom Label IDs as a pre-loaded set (see "Label ID: Pre-loaded Sets"on page 113) or individually per symbology (see "Label ID: Set Individually Per Symbology"on page 115). If you wish to program the reader to always include an industry standard label identifier for ALL symbology types, see the previous feature "Global AIM ID"on page 110.

Label ID: Pre-loaded Sets

The reader supports two pre-loaded sets of Label IDs. Table 17 shows the default set and alternate set.

CAUTION

When changing from one Label ID set to another, all other reader configuration settings, including the host interface type, will be erased and set to the standard factory defaults. Any customized configuration will be lost.

ENTER/EXIT PROGRAMMING MODE

DEFAULT

Label ID Pre-loaded Set = Return to Default Set

Label ID Pre-loaded Set = Alternate Set

Table 17. Label ID Pre-loaded Sets

Symbology	Default Label ID set		Alternate Label ID set
	ASCII	Hexidecimal	ASCII	Hexidecimal
	character	value	character	value
CODABAR	%	250000	R	520000
CODE11	CE	434500	b	620000
CODE128	#	230000	T	540000

Product Reference Guide 113