Datalogic Scanning I GD4100 manual Beep On Ascii BEL, Beep On Not on File

RS-232/USB-Com Interfaces

Beep On ASCII BEL

When this parameter is enabled, the reader issues a beep when a <BEL> character is detected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal entry or other important event.

ENTER/EXIT PROGRAMMING MODE

Beep On ASCII BEL = Disable

DEFAULT

Beep On ASCII BEL = Enable

Beep On Not on File

This option enables/disables the action of the reader to sound a three beep sequence upon receiving a Not-On-File (NOF) host command.

ENTER/EXIT PROGRAMMING MODE

Beep On Not On File = Disable

DEFAULT

Beep On Not On File = Enable

62 Gryphon™ I GD4100