Chapter 2

Getting Started

About the Reader

Advancements in the LED technology used in this reader significantly improve the illumination of the target field of view, resulting in higher scan efficiency. Whether used in Single Trigger or Continuous Mode, the ergonomic design of the reader will help to promote comfortable handling during extended periods of use.

See "Interface Selection"on page 17 for a listing and descriptions of available interface sets by model type.

Unpacking

Check carefully to ensure the reader and any accessories ordered are present and undamaged. If any damage occurred during shipment, contact Technical Support on page 9.

KEEP THE PACKAGING. Should the unit ever require service, it should be returned in its original shipping container.

Setting Up the Reader

Follow the steps provided in this section to connect and get your reader up and communicating with its host.

1.Install the Interface Cable

2.Select the Interface Type

3.Configure Interface Settings (only if not using factory settings for that interface)

4.Configure Other Features (if modifications are needed from factory settings)

Product Reference Guide

11

Page 13
Image 13
Datalogic Scanning I GD4100 manual About the Reader, Unpacking, Setting Up the Reader