General Features
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or flash its green LED) upon successfully reading a barcode. Choices are:
•Good Read = Indicate after decode
•Good Read = Indicate after transmit
•Good Read = Indicate after CTS goes inactive, then active.
This option, which uses CTS, is only valid for RS- 232 interfaces.
NOTE
ENTER/EXIT PROGRAMMING MODE
DEFAULT
Indicate Good Read = After Decode
Indicate Good Read = After Transmit
Indicate Good Read = After CTS Goes Inactive, Then Active
30 | Gryphon™ I GD4100 |
