Datalogic Scanning I GD4100 manual Scanning Features, Scan Mode

Models: I GD4100

1 324
Download 324 pages 4.78 Kb
Page 39
Image 39

Scanning Features

Scanning Features

Scan Mode

Selects the scan operating mode for the reader. Selections are:

Trigger Single. When the trigger is pulled, scanning is activated until one of the following occurs:

-Scanning Active Time has elapsed

-a label has been read

-the trigger is released

This mode is associated with typical handheld reader operation: when the trigger is pulled, scanning starts and the product scans until the trigger is released, or a label is read, or the maximum Scanning Active Time has elapsed.

Trigger Hold Multiple . When the trigger is pulled, scanning starts and the product scans until the trigger is released or Scanning Active Time has elapsed. Reading a label does not disable scanning. Double Read Timeout prevents undesired multiple reads of the same label while in this mode.

Trigger Pulse Multiple. When the trigger is pulled, continuous scanning is activated until Scanning Active Time has elapsed or the trigger has been released and pulled again. Double Read Timeout1 prevents undesired multiple reads of the same label while in this mode.

Flashing. The reader flashes1 on and off regardless of the trigger status. Flash rate is controlled by Flash On Time and Flash Off Time. When Flash is ON the imager reads continuously; when Flash is OFF scanning is deactivated.

Always On. No trigger pull is required to read a barcode. Scanning is continually on. If the trigger is pulled, the reader acts as if it is in Trigger Single Mode. Double Read Timeout1 prevents undesired multiple reads of the same label while in this mode.

Stand Mode. No trigger pull is required to read a barcode. Scanning is turned on automatically when an item is placed in the reader’s field of view. If the trigger is pulled, the reader acts as if it in single read mode. Double Read Timeout1 prevents undesired multiple reads while in this mode.

Trigger Object Sense. This mode is similar to Stand Mode, except that a trigger pull is required to activate the decoder.

1. Controlled by Flash On Time.

Product Reference Guide

37

Page 39
Image 39
Datalogic Scanning I GD4100 manual Scanning Features, Scan Mode