Dell 28XX Assigning Vlan LAG Settings, Open the Vlan LAG Setting, Displaying the Vlan LAG Table

Figure 7-24. VLAN LAG Setting

•LAG — The LAG number included in the VLAN.

•PVID — Assigns a VLAN ID to untagged packets. The possible field values are 1-4095. VLAN 4095 is defined as per standard and industry practice, as the discard VLAN. Packets classified to this VLAN are dropped.

•Frame Type — Packet type accepted by the LAG. Possible values are:

–Admit Tag Only — Only tagged packets are accepted by the LAG.

–Admit All — Tagged and untagged packets are both accepted by the LAG.

•Ingress Filtering — Enables or disables Ingress filtering by the LAG. Ingress filtering discards packets that are destined to VLANs of which the specific LAG is not a member.

Assigning VLAN LAG Settings:

1Open the VLAN LAG Setting page.

2Select a LAG from the LAG drop-down menu and complete the fields on the page.

3Click Apply Changes.

The VLAN LAG parameters are defined, and the device is updated.

Displaying the VLAN LAG Table

1Open the VLAN LAG Setting page.

2Click Show All.

The VLAN LAG Table opens.

132

Update with your book title