Wizard Step 4

The following information displays:

Finally, setup the default gateway.

Please enter the IP address of the gateway from which this network is reachable(e.g. 192.168.1.1).Default gateway (A.B.C.D):[10.6.22.97]

Enter the default gateway.

Press Enter. The following is displayed (as per the example parameters described):

This is the configuration information that has been collected:

==============================================================

SNMP Interface = Dell_Network_Manager@0.0.0.0

User Account setup = admin

Password = **********

Management IP address = 10.6.22.100 255.255.255.224

Default Gateway is 10.6.22.97

==============================================================

Wizard Step 5

The following information displays:

If the information is correct, please select (Y) to save the configuration, and copy to the start-up configuration file. If the information is incorrect,select (N) to discard configuration and restart the wizard: (Y/N)[Y] Y

Configuring SNMP management interface.

Configuring user account.......

Configuring IP and subnet......

Thank you for using Dell Easy Setup Wizard.

Advanced Configuration

This section provides information about dynamic allocation of IP addresses.

When configuring/receiving IP addresses through DHCP, the configuration received from the server includes the IP address, and may include subnet mask and default gateway.

44

Dell PowerConnect 28xx Systems User Guide

Page 44
Image 44
Dell 28XX manual Advanced Configuration, Finally, setup the default gateway