Figure 6-17. Add SNMP Community
3Select one of the following:
–SNMP Management Station — Defines an SNMP community for a specific management station.
–All — Defines an SNMP community for all management stations.
4Define the remaining fields.
5Click Apply Changes.
The new community is saved, and the device is updated.
Displaying all Communities
1Open the SNMP Community page.
2Click Show All.
The Community Table opens:
Figure 6-18. Community Table
Deleting Communities
1Open the Community Table page.
2Click Show All.
The Community Table opens.
3Select a community from the Community Table.
Update with your book title
77
