Deleting Static Hosts

1Open the Static Hosts page.

2Click Show All.

The Static Hosts Table page opens.

3Check the Remove checkbox next to a static host.

4Click Apply Changes. The host is deleted, and the device is updated.

Configuring Address Binding

The Address Binding page displays a list of the DHCP server’s allocated IP addresses and each IP address’s client identifier, lease expiration time, and allocation type. Open the Address Binding page, click System DHCP Server Address Binding in the tree view.

Figure 6-31. Address Binding

IP Address — Displays the IP addresses of the clients whose bindings are displayed.

Client Identifier — A unique identification of the client specified in dotted hexadecimal notation, e.g., 01b6.0819.6811.72.

Lease Expiration — Displays the lease expiration date and time of the host’s IP address.

Type — Displays the manner in which the IP address was assigned to the host:

Static allocation — The network administrator maps the hardware address of a host to an IP address on the DHCP server.

Permanent allocation — An IP address received through a standard request-reply mechanism is owned by a client permanently (unless changes in the network environment/connections take place, for any reason).

Dynamic allocation — A network device obtains a leased IP address for a specified period of time. The IP address is revoked at the end of this period and the switch must request another IP address.

92

Update with your book title

Page 92
Image 92
Dell 28XX manual Configuring Address Binding, Deleting Static Hosts