Dell 4200 manual Cabling the Cluster Hardware

Two SDS 100 Storage Systems Cabled to a Single RAID Controller

Connecting the cluster to two SDS 100 storage systems is similar to connecting to a single SDS 100 storage system.

First, connect the channel 0 connector of each Power- Edge Expandable RAID Controller to the back of the first storage system, as described in the preceding section. Then connect the channel 1 connector of each RAID con- troller to the second storage system (see Figure 2-2).

Ultra/Wide SCSI connections	ultra-high density connector	Ultra/Wide SCSI connections from
from channel 1 on each		channel 0 on each RAID controller
RAID controller

68-pin connectors (2 on each PowerEdge SDS 100 storage system)

Figure 2-2. Cabling Single RAID Controllers to Two PowerEdge SDS 100 Storage Systems

Cabling the Cluster Hardware 2-3