TCP/IP address for each NIC:

Node 1, NIC 1 __________________ NIC 2 ___________________

Node 2, NIC 1 __________________ NIC 2 ___________________

The subnet masks for NIC 1 and NIC 2 are different. Subnet masks for the NIC 1s should match. Subnet masks for the NIC 2s should match.

Node 1, NIC 1 __________________ NIC 2 ___________________

Node 2, NIC 1 __________________ NIC 2 ___________________

Domain name: ____________________________

Gopher service is not enabled for IIS.

Drive letters for the SDS 100s:

No. 1 ________ No. 2 _________ No. 3 __________ No. 4 __________

The format of the SDS 100 logical drive is NTFS.

The NIC driver has been updated.

The recommended paging file maximum size is twice the system’s RAM capacity if the RAM capacity is 256 MB or less, or the paging file size has been set at an amount greater than the system RAM, up to the amount of free space on the hard-disk drive.

The recommended registry file size is 64 MB.

The OEM NIC driver remains installed after the Service Pack installation.

On Node 2, the drive letter for the SDS 100 is the same as on Node 1.

Microsoft Cluster Service Installation

Cluster name: _____________________________

Domain name: _____________________________

Administrator’s user name: _________________________

Administrator’s password: _________________________

Name of adapter 1 is Public.

Name of adapter 2 is Private.

Cluster IP address: _________________________

Cluster subnet mask (same as Public): ________________________

© Dell Computer Corporation 1997, Rev.1.1

C-4 Dell PowerEdge Cluster (PowerEdge 4200) Installation and Troubleshooting Guide

Page 66
Image 66
Dell 4200 manual Microsoft Cluster Service Installation