Dell ® PowerEdge® Cluster Installer Data Card and Checklist
Instructions: Before installing the Microsoft® Windows NT® Enterprise Edition operating system with clustering, use this checklist to gather information and ensure the preparation required for a successful installation. Ensure that all equipment is present and prop- erly cabled and that you know how to install Windows NT Server Enterprise Edition.
Cluster order number: ____________________
Software and Firmware
❑Dell PowerEdge Expandable RAID Controller cluster firmware revision: ______________________
❑The Intel Pro100B driver revision is 2.22 or later.
❑Cluster system configuration utility version: ____________________
❑Windows NT Server Enterprise Edition revision: __________________
❑xover.exe revision: ____________________
Pre-Installation Settings
❑PowerEdge Expandable RAID Controller initiator IDs: Node 1: ______________ and Node 2: ________________
❑The cluster RAID controller has been configured for
❑The RAID level and logical drives are configured and initialized.
❑Cluster Mode for the Dell PowerEdge 4200 Cluster has been turned on in the system BIOS.
Windows NT Server Settings
❑The RAID controller drivers are installed.
❑A
❑License type: _________________ Number: __________________
❑Network name for this computer: ___________________
❑Domain type has been chosen (Primary Domain Controller, Backup Domain Controller, or
❑Administrator user name: _________________
❑Administrator password: _________________
❑Network participation has been wired to network.
❑Microsoft Internet Information Server (IIS) has been installed.
❑All network adapters have been found and accepted.
❑Network protocol is TCP/IP only. Uncheck any others.
❑SNMP service has been added.
❑DHCP server is not selected.
Cluster Data Sheet |
