Appendix F

Safety Information for Technicians

Before you perform any procedures on the PowerEdge Cluster equipment, read the following warnings for your personal safety and to prevent damage to the system from electrostatic discharge (ESD). Refer to the appropriate system documentation before servicing any system.

WARNING: The components of this cluster system may have more than one power supply cable. To reduce the risk of electrical shock, a trained service technician must disconnect all power supply cables before servicing any system components.

WARNING FOR YOUR PERSONAL SAFETY AND PROTECTION OF THE EQUIPMENT:

Before you start to work on a system component, perform the following steps in the sequence listed:

1.Turn off the system component.

2.Disconnect the system component from its power source(s).

3.Disconnect any communications cables.

4.Wear a wrist grounding strap, and clip it to an unpainted metal surface, such as a part of the back panel, on the chassis.

5.If a wrist grounding strap is not available, touch the fan guard or some other unpainted metal surface on the back of the chassis to dis- charge any static charge from your body.

Safety Information for Technicians

F-1

Page 71
Image 71
Dell 4200 manual Safety Information for Technicians