Dell 4200 Regulatory Compliance, Regulatory Standards, CE Notice, Safety Standard, EMC Standards

Appendix E

Regulatory Compliance

Regulatory Standards

Dell PowerEdge Cluster has been tested and certified to the following standards:

•IEC950:1991 + A1:1992 + A2:1993 + A3:1995

•EN60950:1992 + A1:1993 + A2:1993 + A3:1995

•EMKO-TSE (74-SEC) 207/94

•Miti Ordinance No. 85

•UL1950, 3rd Edition

•C22-2 No. 950, 3rd Edition

CE Notice

Marking by the symbol indicates compliance of this Dell system to the Safety and EMC (Electromagnetic Compatibility) directives of the European Community (89/336/EEC and 73/23/EEC). Such marking is indica- tive that this Dell system meets or exceeds the following technical standards.

Safety Standard

•EN60950:1992 + Amd.1:1993 + Amd.2:1993 — “Safety of Information Technology Equipment including Electrical Business Equipment.”

EMC Standards

•EN 55022 — “Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.”

NOTE: EN 55022 emissions requirements provide for two classifications—Class A and Class B. If any one of the registration labels (on the bottom or back panel of your computer, on card-mounting brackets, or on the cards themselves) carries an FCC Class A rating, the following warning applies to your system.

WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

•EN 50082-1 — “Electromagnetic compatibility— Generic immunity standard Part 1: Residential, commercial, and light industry.”

•IEC 801-2 — “Electromagnetic compatibility for industrial-process measurement and control equipment Part 2: Electrostatic discharge require- ments.” — Severity level 3.

•IEC 801-3 — “Electromagnetic compatibility for industrial-process measurement and control equip- ment Part 3: Radiated electromagnetic field requirements.” — Severity level 2.

•IEC 801-4 — “Electromagnetic compatibility for industrial-process measurement and control equip- ment Part 4: Electrical fast transient/burst requirements.” — Severity level 2.

A “Declaration of Conformity” in accordance with the preceding standards has been made and is on file at Dell Products Europe BV, Limerick, Ireland.

Regulatory Compliance E-1