66 Adding Parts
www.dell.com | support.dell.com
6Use the two view slots to align the pivot bar with the two piv o t- bar
slots.
NOTICE: Using excessive force to pull the hinge arms into place may damage
the arms or the front panel.
7Pull the arms toward you until they snap into place.
If the hinge arms don’t snap back into place on the first attempt,
slightly reposition the arms and try again.
8After the hinge arms clip into place, lower and raise the arms tw o or
three times to properly seat them.
9Reattach the front-panel insert.
hinge arms in
horizontal
position
pivot bar
view slots (2) pivot-bar slots (2)
9p915bk0.book Page 66 Thursday, April 4, 2002 9:26 AM