Adding Parts 81
Adding a Second Hard Drive CAUTION: Befor e you be gin any of the proce dures i n this s ection,
follow the safety instructions listed in "When Working Inside Your
Computer" on page 12.
Your computer includes one hard drive. To add a second hard drive:
1Shut down the computer (see page 20).
2Turn off any attached devices and disconnect them from their
electrical outlets.
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
3Disconnect the computer power cable from the wall outlet, and then
press the power button to ground the system board.
4Unpack the drive and prepare it for installation.
See the drive documentation to ensure that the drive is set up for your
computer.
5Open the computer cover (see page 67).
card clip
lever
AGP card
AGP card clip
slot connector back of computer
9p915bk0.book Page 81 Thursday, April 4, 2002 9:26 AM