Dell 8200 manual Adding Parts

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

HINT: Two sets of rails are attached to the inside of the computer cover. Use the two longer rails on 5.25-inch drives.

Use the shorter rails for 3.5-inch drives. Rails for a second hard drive are attached inside the hard- drive bay.

6Remove the two green plastic rails from the inside of the hard-drive bay.

These rails are not attached to the inside of the hard-drive bay with screws. To remove the rails, gently pull the rails up and out of the bay.

7Attach the rails to the hard drive using the two screws attached to the rails.

Ensure that the rail tabs are positioned at the back of the hard drive.

NOTICE: Do not install any drive into the lower hard-drive bay until after you have removed the green drive rails from the inside of the hard-drive cage.

8Remove the first hard drive from the upper bay and install it in the lower bay:

a Disconnect the power cable and the data cable from the back of the first hard drive.

b Press in the two green rail tabs and pull the first hard drive out of the upper bay.

c Gently slide the first hard drive into the lower bay until you hear a click.

d Reconnect the power cable and the data cable to the back of the first hard drive.

9Gently slide the new hard drive into the upper bay until you hear a click.

82

Adding Parts