Dell 860 owner manual Insert a diskette that has a bootable, Faulty or improperly installed PCIe

Table 1-4. System Messages (continued)

Message	Causes	Corrective Actions
Not a boot diskette	The operating system is trying to boot	Insert a diskette that has a bootable
	from a diskette that does not have a	operating system.
	bootable operating system installed
	on it.

PCI BIOS failed to install PCI device BIOS (Option ROM) checksum failure is detected during shadowing.

Ensure that all appropriate cables are securely connected to the expansion cards. If the problem persists, see "Troubleshooting Expansion Cards" on page 91.

PCIe Degraded Link Width	Faulty or improperly installed PCIe	Reseat the PCIe cards. See "Expansion
Error: Embedded	card.	Cards" on page 63. If the problem
Bus#nn/Dev#nn/Funcn		persists, see "Getting Help" on page 103.
Expected Link Width is n
Actual Link Width is n
PCIe Degraded Link Width	Faulty or improperly installed PCIe	Reseat the PCIe card in the specified
Error: Slot n	card in the specified slot number.	slot number. See "Expansion Cards" on
Expected Link Width is n		page 63. If the problem persists, see
		"Getting Help" on page 103.
Actual Link Width is n
PCIe Training Error:	Faulty or improperly installed PCIe	Reseat the PCIe cards. See "Expansion
Embedded	card.	Cards" on page 63. If the problem
Bus#nn/Dev#nn/Funcn		persists, see "Getting Help" on page 103.
PCIe Training Error:	Faulty or improperly installed PCIe	Reseat the PCIe card in the specified
Slot n	card in the specified slot number.	slot number. See "Expansion Cards" on
		page 63. If the problem persists, see
		"Getting Help" on page 103.

Plug & Play Configuration	Error encountered in initializing PCI
Error	device; faulty system board.

Install the NVRAM_CLR jumper and reboot the system. See Figure 6-1 for jumper location. Check for a BIOS update. If the problem persists, see "Troubleshooting Expansion Cards" on page 91. If the problem persists, see "Getting Help" on page 103.

Primary drive 0/1	Faulty drive. Parameters failure.	Ensure that the hard drive cables are
configuration error		properly connected. See
		"Troubleshooting a Hard Drive" on
		page 90.

About Your System

19