Dell 860 owner manual Console Redirection Screen

Table 2-4. Integrated Devices Screen Options (continued)

Option	Description
Serial Port	Serial Port options are COM1, COM3, BMC Serial, BMC NIC,
(COM1 default)	COM1/BMC, and Off. If an optional remote access controller
	(RAC) is installed in the system, RAC is an additional option.
	Serial Port shares three usage models. For standard usage, Serial
	Port attempts to use COM1 first, and then COM3. For BMC
	usage, serial port 1 uses the COM1 address and communication
	can be either via the serial port or the integrated shared NIC. RAC
	control uses only the COM1 address.
	The COM1/BMC setting allows you to toggle the system between
	a COM1 setting and BMC Serial setting. In this mode, press
	<ESC> to enter the BMC Serial setting and press <ESC><q>
	to return to the COM1 setting.
	Off and COM3 are not available options when Console
	Redirection is set to use Serial Port 1.
Speaker	Enables or disables the system internal speaker.
(On default)

Console Redirection Screen

Table 2-5 lists the options and descriptions for the information fields that appear on the Console Redirection screen.

Table 2-5. Console Redirection Screen Options

Option	Description
Console Redirection	Sets the console redirection feature to Off or Serial Port.
(Off default)
Failsafe Baud Rate	Displays if the failsafe baud rate is used for console redirection.
(115200 default)
Remote Terminal Type	Select either VT 100/VT 220 or ANSI.
(VT 100/VT 220 default)
Redirection After Boot	Enables or disables console redirection after your system restarts.
(Enabled default)

Using the System Setup Program

35