Table 2-2. System Setup Program Options (continued)
Option | Description |
|
|
Video Memory | Displays the amount of video memory. This option does not have user- |
| selectable settings. |
|
|
System Memory Testing | Determines if memory is being tested during POST. |
(Enabled default) |
|
|
|
OS Install Mode | Determines the maximum amount of memory available to the operating |
(Off default) | system. On sets the maximum memory to 256 MB. Off makes all of the |
| system memory available to the operating system. Some operating |
| systems cannot install with more than 2 GB of system memory. Enable |
| this option (On) during operating system installation and disable (Off) |
| after installation. |
|
|
CPU Information | See "CPU Information Screen" on page 33. |
|
|
IDE Primary Drive 0 | Enables (Auto) or disables (Off) the IDE device in Drive 0 (optical drive). |
(Auto) |
|
|
|
SATA Port (0 – 1) | Enables (Auto) or disables (Off) the SATA hard drive in Port 0. |
(Auto) |
|
|
|
Boot Sequence | Determines the order in which the system searches for boot devices |
| during system startup. Available options can include the diskette drive, |
| CD drive, hard drives, and network. |
|
|
| Determines the order in which the system searches the hard drives during |
Sequence | system startup. The selections depend on the hard drives installed in your |
| system. |
|
|
USB Flash Drive | Determines the emulation type for a USB flash drive. Hard disk allows |
Emulation Type | the USB flash drive to act as a hard drive. Auto automatically chooses an |
(Auto default) | emulation type. |
|
|
Integrated Devices | See "Integrated Devices Screen" on page 34. |
|
|
PCI IRQ Assignment | Displays a screen to change the IRQ assigned to each of the integrated |
| devices on the PCI bus, and any installed expansion cards that require an |
| IRQ. |
|
|
Console Redirection | See "Console Redirection Screen" on page 35. |
|
|
System Security | Displays a screen to configure the system password and setup password |
| features. See "Using the System Password" on page 37 and "Using the |
| Setup Password" on page 39 for more information. |
|
|
Keyboard NumLock | Determines whether your system starts up with the NumLock mode |
(On default) | activated on 101– or |
| keyboards). |
32
