Figure 6. Removing and installing the sled |
|
| |
1. | FX2/FX2s enclosure | 2. | sled |
3. | sled handle | 4. | release button |
Installing the sled
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: To prevent damage to the I/O connectors, do not touch connectors or the connector pins.
NOTE: Before installing the sleds, place the chassis in the location that you want.
Ensure that you read the Safety instructions.
Steps
1.If you are installing a new sled, remove the plastic cover from the I/O connector(s) and save for future use.
2.Press the release button on the sled handle to the open position.
38
