Installing a hard drive/SSD | Dell E02B specification

Related Links

Hard-drive/SSD indicator patterns

Installing a hard drive/SSD

Prerequisites

CAUTION: When a replacement hot-swappable hard drive/SSD is installed and the sled is powered on, the hard drive/SSD automatically begins to rebuild. Make absolutely sure that the replacement hard drive/SSD is blank or contains data that you wish to have over-written. Any data on the replacement hard drive/SSD is immediately lost after the hard drive/SSD is installed.

NOTE: You must remove a hard drive/SSD to upgrade a hard drive/SSD or replace a faulty hard drive/SSD.

1.Ensure that you read the Safety instructions.

2.Remove the hard drive/SSD or hard-drive/SSD blank.

NOTE: All operating systems do not support hot-swappable drive installation. See the documentation supplied with your operating system.

Steps

1.Press the release button to open the hard-drive/SSD carrier handle.

2.Slide the hard-drive/SSD carrier into the drive bay. Carefully align the channel on the hard-drive/SSD carrier with the appropriate drive slot on the sled.

3.Push the drive carrier into the slot until the handle makes contact with the sled.

4.Rotate the carrier handle to the closed position while pushing the carrier into the slot until it locks into place.

The status LED indicator displays a steady green light if the drive is installed correctly. The drive carrier LED green indicator flashes as the drive rebuilds.

Removing a hard-drive/SSD blank

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: To maintain proper system cooling, all empty hard-drive/SSD slots must have hard- drive/SSD blanks installed.

1.Ensure that you read the Safety instructions.

Steps

Press the release latch and slide the hard-drive/SSD blank out of the hard-drive/SSD slot.

72

Image 72

Dell E02B owner manual Installing a hard drive/SSD, Removing a hard-drive/SSD blank

Contents

Dell PowerEdge FC630 Page Contents Installing and removing sled components Troubleshooting your system Using System Diagnostics 102 Jumpers and connectors 104Technical specifications 107 Getting help 112 Front-panel features and indicators About your system Using USB diskette or USB DVD/CD drives Hard-drive/SSD indicator patterns IDRAC Direct LED indicator codes Hard-drive/SSD indicators IDRAC Direct LED indicator Documentation matrix Quick Resource Locator Setting up your system Setting up and configuring the iDRAC IP address Logging in to iDRAC Installing the operating system Page About System Setup Navigation keys Entering System Setup System Setup Main MenuSystem Bios screen System Information screen System Memory screen Processor Settings screen ATS Sata Settings screen Post Page Boot Settings screen Network Settings screen Integrated Devices screen Serial Communication screen System Profile Settings screen C1E System Security Settings screen Miscellaneous Settings screen Secure Boot Custom Policy Settings screenPage About Boot Manager About Dell Lifecycle Controller Changing the boot orderEntering Boot Manager Boot Manager main menu Choosing the system boot mode Assigning a system and/or setup password Using your system password to secure your system Operating with a setup password enabled IDRAC Settings utilityEmbedded systems management Entering the iDRAC Settings utility Safety instructions Recommended toolsBefore working inside your system After working inside your system Removing and installing a sled Removing the sled O connector cover Installing the sled Removing and installing the sled Inside the sled NDC Cooling shroud Removing the cooling shroud Installing the cooling shroud Processor/DIMM blankRemoving a processor/DIMM blank Installing a processor/DIMM blank Removing and installing a processor/DIMM blank System memory Lrdimm Processor General memory-module installation guidelines Mode-specific guidelines Advanced ECC Lockstep Sample memory configurations Memory configurations two processors Removing memory modules Installing memory modules Removing the memory module PCIe mezzanine card Removing a PCIe mezzanine card Removing and installing a PCIe mezzanine card Installing a PCIe mezzanine card Idsdm card optionalReplacing an SD card Ensure that you read the Safety instructions Internal USB key Replacing an SD card Replacing the internal USB key Removing and installing the Idsdm card Removing the Idsdm card Installing the Idsdm card RSPI card optional Removing the rSPI card Installing the rSPI card SD vFlash cardReplacing the SD vFlash card Network Daughter Card Removing the Network Daughter Card Install the NDC. See Installing the Network Daughter Card Installing the Network Daughter Card Processors Removing a processor Installing and removing a heat sink Processor shield opening and closing lever sequence Installing a processor Installing and removing a processorPage Applying thermal grease on the top of the processor Hard drive/SSD installation guidelines Hard drives/SSDsHard-drive/SSD bay numbering Removing and installing a hard drive/SSD Removing a hard drive/SSD Installing a hard drive/SSD Removing a hard-drive/SSD blank Hard-drive/SSD blank Release latch Installing a hard-drive/SSD blank Shutdown procedure for servicing a hard drive/SSDConfiguring the boot drive Hard drive/SSD Removing a 1.8 inch SSD from a 1.8 inch SSD carrier Installing a 1.8 inch SSD in a 1.8 inch SSD carrier Removing the hard-drive/SSD cage Installing the hard-drive/SSD cage Removing and installing a hard-drive/SSD cage Hard-drive backplane Removing the hard-drive/SSD backplane Removing and installing the hard-drive/SSD backplane Installing the hard-drive/SSD backplane Perc H730P slim card Removing a Perc H730P slim card Installing a Perc H730P slim card Removing and installing a Perc H730P slim card Storage controller card Removing the PCIe extender/storage controller cardPage Installing the PCIe extender/storage controller card Nvram backup battery Replacing the Nvram backup battery Replacing the Nvram backup battery System board Removing the system boardPage Hex nut screw System board Screw Installing the system board Restoring the Service Tag using Easy Restore Installing the Trusted Platform Module Trusted Platform Module Re-enabling the TPM for BitLocker users Re-enabling the TPM for TXT users Troubleshooting your system Troubleshooting hard drives Troubleshooting USB devices Troubleshooting Solid State Drives Troubleshooting an internal SD card Troubleshooting processors Troubleshooting the system board Troubleshooting the Nvram backup battery Diagnostic messages System messagesAlert messages Dell Embedded System Diagnostics When to use the Embedded System DiagnosticsRunning the Embedded System Diagnostics Running Embedded System Diagnostics from an external media System diagnostics controls Jumpers and connectors System board jumper settings System board connectors CPU1 Disabling a forgotten password Technical specifications USB Per ISO 14644-1 with a 95% upper confidence 110 Page Locating your system Service Tag Contacting DellDocumentation feedback 113