Restoring the Service Tag using Easy Restore | Dell E02B specs

i.hard drive(s)/SSD(s)

NOTE: Ensure that you reinstall the hard drives/SSDs in their original locations.

j.cooling shroud

k.memory modules

l.processor(s) and heat sink(s)

3.Follow the procedure listed in After working inside your system.

NOTE: If you are not installing the sled in the enclosure, install the I/O connector cover.

4.Import your new or existing iDRAC Enterprise license. See the iDRAC8 User's Guide at dell.com/ esmmanuals.

5.Ensure that you:

a.Use the Easy Restore feature to restore the Service Tag. For more information, see Restoring the Service Tag using Easy Restore.

b.If the Service Tag is not backed up in the backup flash device, enter the system Service Tag manually. For more information, see Entering the system Service Tag using System Setup.

c.Update the BIOS and iDRAC versions.

d.Re-enable the Trusted Platform Module (TPM). For more information, see Re-enabling the TPM for BitLocker users or Re-enabling the TPM for TXT users.

Related Links

Replacing the internal USB key

Replacing the SD vFlash card

Installing the IDSDM card

Installing the rSPI card

Installing the Network Daughter Card

Installing a PCIe mezzanine card

Installing the PCIe extender/storage controller card

Installing the hard-drive/SSD cage

Installing the hard-drive/SSD backplane

Installing a hard drive/SSD

Installing the cooling shroud

Installing memory modules

Installing a processor

Restoring the Service Tag using Easy Restore

Use the Easy Restore feature if you do not know the Service Tag of your system. The Easy Restore feature allows you to restore your system’s Service Tag, license, UEFI configuration, and the system configuration data after replacing the system board. All data is backed up in a rSPI card automatically. If BIOS detects a new system board and the Service Tag in the rSPI card, BIOS prompts the user to restore the backup information.

1.Turn on the system.

If BIOS detects a new system board, and if the Service Tag is present in the rSPI card, BIOS displays the Service Tag, the status of the license, and the UEFI Diagnostics version.

2.Do one of the following:

• Press Y to restore the Service Tag, license, and diagnostics information.

93

Image 93

Dell E02B owner manual Restoring the Service Tag using Easy Restore

Contents

Dell PowerEdge FC630 Page Contents Installing and removing sled components Troubleshooting your system Using System Diagnostics 102 Jumpers and connectors 104Technical specifications 107 Getting help 112 About your system Front-panel features and indicators Hard-drive/SSD indicator patterns Using USB diskette or USB DVD/CD drives Hard-drive/SSD indicators IDRAC Direct LED indicator codes IDRAC Direct LED indicator Documentation matrix Quick Resource Locator Setting up and configuring the iDRAC IP address Setting up your system Logging in to iDRAC Installing the operating system Page Navigation keys About System Setup Entering System Setup System Setup Main MenuSystem Bios screen System Memory screen System Information screen ATS Processor Settings screen Sata Settings screen Post Page Network Settings screen Boot Settings screen Integrated Devices screen Serial Communication screen C1E System Profile Settings screen System Security Settings screen Secure Boot Custom Policy Settings screen Miscellaneous Settings screenPage About Dell Lifecycle Controller Changing the boot order About Boot ManagerEntering Boot Manager Boot Manager main menu Assigning a system and/or setup password Choosing the system boot mode Using your system password to secure your system Operating with a setup password enabled IDRAC Settings utilityEmbedded systems management Entering the iDRAC Settings utility Recommended tools Safety instructionsBefore working inside your system After working inside your system Removing the sled Removing and installing a sled O connector cover Removing and installing the sled Installing the sled NDC Inside the sled Removing the cooling shroud Cooling shroud Installing the cooling shroud Processor/DIMM blankRemoving a processor/DIMM blank Removing and installing a processor/DIMM blank Installing a processor/DIMM blank Lrdimm System memory Processor General memory-module installation guidelines Advanced ECC Lockstep Mode-specific guidelines Sample memory configurations Memory configurations two processors Removing memory modules Removing the memory module Installing memory modules Removing a PCIe mezzanine card PCIe mezzanine card Removing and installing a PCIe mezzanine card Installing a PCIe mezzanine card Idsdm card optionalReplacing an SD card Ensure that you read the Safety instructions Replacing an SD card Internal USB key Replacing the internal USB key Removing the Idsdm card Removing and installing the Idsdm card Installing the Idsdm card Removing the rSPI card RSPI card optional Installing the rSPI card SD vFlash cardReplacing the SD vFlash card Removing the Network Daughter Card Network Daughter Card Install the NDC. See Installing the Network Daughter Card Processors Installing the Network Daughter Card Removing a processor Installing and removing a heat sink Processor shield opening and closing lever sequence Installing and removing a processor Installing a processorPage Applying thermal grease on the top of the processor Hard drive/SSD installation guidelines Hard drives/SSDsHard-drive/SSD bay numbering Removing a hard drive/SSD Removing and installing a hard drive/SSD Removing a hard-drive/SSD blank Installing a hard drive/SSD Hard-drive/SSD blank Release latch Installing a hard-drive/SSD blank Shutdown procedure for servicing a hard drive/SSDConfiguring the boot drive Hard drive/SSD Removing a 1.8 inch SSD from a 1.8 inch SSD carrier Removing the hard-drive/SSD cage Installing a 1.8 inch SSD in a 1.8 inch SSD carrier Removing and installing a hard-drive/SSD cage Installing the hard-drive/SSD cage Removing the hard-drive/SSD backplane Hard-drive backplane Removing and installing the hard-drive/SSD backplane Installing the hard-drive/SSD backplane Removing a Perc H730P slim card Perc H730P slim card Removing and installing a Perc H730P slim card Installing a Perc H730P slim card Removing the PCIe extender/storage controller card Storage controller cardPage Installing the PCIe extender/storage controller card Replacing the Nvram backup battery Nvram backup battery Replacing the Nvram backup battery Removing the system board System boardPage Hex nut screw System board Screw Installing the system board Restoring the Service Tag using Easy Restore Trusted Platform Module Installing the Trusted Platform Module Re-enabling the TPM for TXT users Re-enabling the TPM for BitLocker users Troubleshooting your system Troubleshooting USB devices Troubleshooting hard drives Troubleshooting Solid State Drives Troubleshooting processors Troubleshooting an internal SD card Troubleshooting the Nvram backup battery Troubleshooting the system board Diagnostic messages System messagesAlert messages Dell Embedded System Diagnostics When to use the Embedded System DiagnosticsRunning the Embedded System Diagnostics System diagnostics controls Running Embedded System Diagnostics from an external media System board jumper settings Jumpers and connectors CPU1 System board connectors Disabling a forgotten password Technical specifications USB Per ISO 14644-1 with a 95% upper confidence 110 Page Locating your system Service Tag Contacting DellDocumentation feedback 113