Figure 28. Removing and installing a 2.5 inch hard drive/SSD in a 2.5 inch hard-drive/SSD carrier

1.

screw (4)

2.

hard drive/SSD

3.

hard-drive/SSD carrier

4.

screw hole (4)

Next steps

Install a new 2.5 inch hard drive/SSD in a 2.5 inch hard-drive/SSD carrier. See Installing a 2.5 inch hard drive/SSD in a 2.5 inch hard-drive/SSD carrier.

Installing a 2.5 inch hard drive/SSD in a 2.5 inch hard-drive/SSD carrier

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE: You must remove the hard drive/SSD from a hard-drive/SSD carrier to replace a faulty hard drive/SSD from a hard-drive/SSD carrier.

1.Ensure that you read the Safety instructions.

2.Keep the #1 Phillips screwdriver ready.

3.Remove a 2.5 inch hard drive/SSD from 2.5 inch hard-drive/SSD carrier. See Removing a 2.5 inch hard drive/SSD from a 2.5 inch hard-drive/SSD carrier.

75

Page 75
Image 75
Dell E02B owner manual Hard drive/SSD