Dell E02B owner manual Installing and removing a heat sink

Figure 19. Installing and removing a heat sink
1.	retention screw (4)	2.	heat sink
3.	processor socket	4.	heat sink retention socket (4)

5.Use a clean, lint-free cloth to remove any thermal grease from the surface of the processor shield.

CAUTION: The processor is held in its socket under strong pressure. Be aware that the release lever can spring up suddenly if not firmly grasped.

6.Position your thumb firmly over the socket-release lever1 and lever 2 of the processor and release both the levers simultaneously from the locked position by pushing down and out from under the tab.

65