Dell E02B owner manual General memory-module installation guidelines

General memory-module installation guidelines

Your system supports Flexible Memory Configuration, enabling the system to be configured and run in any valid chipset architectural configuration. The following are the recommended guidelines for best performance:

•LRDIMMs, and RDIMMs must not be mixed.

•x4 and x8 DRAM based DIMMs can be mixed. For more information, see Mode-specific guidelines.

•A maximum of three single- or dual-rank RDIMMs can be populated in a channel.

•Populate DIMM sockets only if a processor is installed. For single-processor systems, sockets A1 to

A12 are available. For dual-processor systems, sockets A1 to A12 and sockets B1 to B12 are available.

•Populate all sockets with white release tabs first, black, and then green.

•Populate the sockets by highest capacity DIMM in the following order - first in sockets with white release levers and then black. For example, if you want to mix 16 GB and 8 GB DIMMs, populate 16 GB DIMMs in the sockets with white release tabs and 8 GB DIMMs in the sockets with black release tabs.

•In a dual-processor configuration, the memory configuration for each processor must be identical. For example, if you populate socket A1 for processor 1, then populate socket B1 for processor 2, and so on.

•Memory modules of different sizes can be mixed provided that other memory population rules are followed (for example, 4 GB and 8 GB memory modules can be mixed).

•Depending on mode-specific guidelines, populate four DIMMs per processor (one DIMM per channel) at a time to maximize performance. For more information, see Mode-specific guidelines.

Table 2. Heat sink — processor configurations

Processor	Processor Type (in	Heat	Number of DIMMs
Configuration	Watts)	Sink
			Maximum System	Reliability, Availability,
		Width
			Capacity	and Serviceability (RAS)
				Features
Single processor	105 W, 120 W or 135	68	12	12
	W	mm
	135 W (four cores, six	104	8 (Three DIMMs in	4 (One DIMM per
	cores, or eight cores),	mm	channel 0 and	channel)
	145 W, or 105		channel 2 and one
	acoustic		DIMM in channel 1
	configuration		and channel 3)

NOTE: When using an 104 mm wide heat sink for a single processor, the memory module sockets A6, A8, A10, and A12 are not available for population.

Dual processor 105 W, 120 W or 135	68	24	24
W	mm
135 W (four cores, six	104	16 (Three DIMMs in	8 (One DIMM per
cores, or eight cores),	mm	channel 0 and	channel)
145 W, or 105		channel 2 and one
acoustic		DIMM in channel 1
configuration		and channel 3)

NOTE: When using an 104 mm wide heat sink for a dual processor, the memory module sockets A6, A8, A10, A12, B6, B8, B10, and B12 are not available for population.

45