
3.Remove the
4.Loosen the two retention screws securing the
5.Lift the backplane up and away from the system.
Figure 31. Removing and installing the hard-drive/SSD backplane
1. | 2. | ||
3. | retention screw (2) | 4. | screw hole on the |
|
|
| (2) |
5. | guide pin | 6. | retention screw on the |
|
|
| backplane cable connector (2) |
7.connector
Next steps
1.Install the
2.Install the hard drive/SSD.
3.Follow the procedure listed in After working inside your system.
Related Links
Removing a hard drive/SSD
80