Steps
1.Open the PCIe mezzanine card retention latch by pressing the release tab on the retention latch.
2.Pull back and hold the retention bracket away from the PCIe mezzanine card.
3.Lift the end of the retention latch until the two connectors on the PCIe mezzanine card disengage from connectors on the system board.
CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges.
4.Lift the PCIe mezzanine card up and away from the system.
5.Close the retention latch.
Figure 12. Removing and installing a PCIe mezzanine card |
| |
1. | PCIe mezzanine card | 2. PCIe mezzanine card retention bracket |
3. | PCIe mezzanine card connector (2) | 4. PCIe mezzanine card retention latch |
Next steps
1.Install the PCIe mezzanine card. See Installing a PCIe mezzanine card.
2.Follow the procedure listed in After working inside your system.
52
