Dell E02B owner manual

Steps

1.Loosen the two retention screws on the hard-drive/SSD backplane cable connector and lift it away from the PCIe extender/storage controller card.

CAUTION: To prevent damage to the PCIe extender/storage controller card, you must hold the card only by its edges.

2.Lift the PCIe extender/storage controller card up and away from the system.

Figure 33. Removing and installing the PCIe extender/storage controller card

1.	retention screw (2)	2. slot on the PCIe extender/storage
		controller card
3.	tab on the PCIe extender/storage	4. standoff (2)
	controller card support bracket

Next steps

1.Install the PCIe extender/storage controller card. See Installing the PCIe extender/storage controller card.

2.Install the following:

a.hard-drive/SSD cage

b.hard-drive/SSD backplane

c.hard drives/SSDs

85