Figure 3. Hard-drive/SSD indicators
1. | drive activity indicator (green) | 2. | drive status indicator (green and amber) |
NOTE: If the drive is in Advanced Host Controller Interface (AHCI) mode, the status LED (on the right side) does not function and remains off.
Condition | |
|
|
Blinks green two times per second | Identifying drive or preparing for removal |
Off | Drive ready for insertion or removal |
Blinks green, amber, and then turns off
Blinks amber four times per second
Blinks green slowly
Steady green
Blinks green three seconds, amber three seconds, and off six seconds
NOTE: The drive status indicator remains off until all drives are initialized after system power is applied. Drives are not ready for insertion or removal during this time.
Drive predicted failure
Drive failed
Drive rebuilding
Drive online
Rebuild aborted
iDRAC Direct LED indicator codes
NOTE: The iDRAC Direct LED indicator does not light up for the USB mode.
9
