Dell PP01S technical specifications RAM. If Suspend Mode is set to Save to Disk, Resume on Modem

System Setup Options: Dell Latitude LS Portable Computers User's Guide

Suspend Mode	Lets you select one of two suspend modes: Save to RAM and Save to
	Disk.
	Save to RAM conserves battery power by stopping almost all computer
	activity, but leaves the computer ready to resume operations in seconds
	when the power button is pressed. Save to Disk saves all system data
	to your hard-disk drive and then turns off all power. Use Save to Disk to
	conserve battery power or (in conjunction with Battery Low Suspend) to
	preserve system data quickly if you are about to run out of battery power.
Resume on	Sets the computer to resume normal operation when an incoming call is
Modem Ring	detected by the modem and the computer is in suspend (or standby)
	mode. Settings are On and Off.
	NOTE: To use this option, you must set Suspend Mode to Save to
	RAM. If Suspend Mode is set to Save to Disk, Resume on Modem
	Ring does not function.
Resume On Time	Sets the computer to resume operation at a time you specify in the
	Resume Time option. (Resume Time appears on the screen only when
	Resume On Time is set to On.) Settings are On and Off.
	NOTE: To use this option, you must set Suspend Mode to Save to
	RAM. If Suspend Mode is set to Save to Disk, Resume on Time does
	not function.
Resume Time	Resume Time appears on the screen only when Resume On Time is
	set to On. Use this option to specify a time for the computer to resume
	operation from suspend (or standby) mode.
	NOTE: To use this option, you must set Suspend Mode to Save to
	RAM. If Suspend Mode is set to Save to Disk, Resume Time does not
	function.
	Use <Tab> or <Shift><Tab> to move between fields in the time setting.
	Either enter the time or use the spacebar to increase/descrease the
	numbers.
Auto Dim	Extends battery life by setting the computer to automatically decrease
	the brightness of the display when running on battery power. Options are
	Enabled (the default) and Disabled.
Lid Close	Specifies how the computer will respond when the display lid is closed:
	● Active (the default) — the computer switches the display image to
	an attached monitor.
	● Suspend — the computer suspends to RAM.

file:///C/Documents and Settings/Administrator/D...Web/Documentation/LS/LS User's Guide/setupopt.htm (10 of 13) [5/31/2000 9:48:26 AM]