Suspend-to-Disk Utility: Dell Latitude LS Portable Computers User's Guide

To check the size of the S2D file, at an MS-DOS prompt type phdisk /info and press

<Enter>.

If you need to delete the S2D file, at an MS-DOS prompt type phdisk /delete /partition and press <Enter>.

NOTICE: The S2D file is placed in your computer's root directory, where it may be a hidden file, depending on how you set up your operating system. Do not delete the file inadvertently.

To restore the default boot sequence, perform the following steps:

1.Turn on or restart the computer.

2.Press <F2> as soon as you see the Dell logo screen to enter the system setup program. If you wait too long and the operating system begins to load into memory, let the computer complete the load operation. Then shut down the computer and try again.

3.Enter the Boot screen, and press <F9> to restore the default boot sequence.

4.Press <F10> to save the settings and exit the system setup program.

Back to Contents Page

file:///C/Documents and Settings/Administrator/De...p/New Web/Documentation/LS/LS User's Guide/s2d.htm (4 of 4) [5/31/2000 9:48:32 AM]

Page 115
Image 115
Dell PP01S technical specifications Back to Contents