6Remove the two screws securing the hard drive to the
7Slide the hard drive out of the
Replacing the Hard Drive
1Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.
2Slide the hard drive into the
3Replace the two
4Place the hard drive assembly in the hard drive bay by aligning the tabs on the hard drive assembly with the slots in the bay and pressing the connector end down.
5Replace the hard drive door and tighten the screws.
6Install the operating system for your computer, as needed (see "Restoring Your Microsoft® Windows Vista™ Operating System" on page 153).
7Install the drivers and utilities for your computer, as needed (see "Reinstalling Drivers and Utilities" on page 149).
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original, or comparable, foam packaging. Otherwise, the hard drive may be damaged in transit.
168
Adding and Replacing Parts