1

23

1

card cable

2

card

3

metal tab

3Using a Phillips screwdriver, remove the screw securing the Bluetooth card to the chassis.

NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.

4While grasping the card cable with one hand, use a plastic scribe to gently pry and lift the Bluetooth card up and out of the communications card bay.

5Disconnect the card from the cable and remove the card from the computer.

To replace the card:

1Connect the Bluetooth card to the card cable.

2Slide the card under the metal clips into the communications card bay.

3Tighten the captive screw to secure the card in the card carrier.

Adding and Replacing Parts

183

Page 183
Image 183
Dell PP26L owner manual 183