Dell PP26L owner manual Replacing a Wwan Card, 185

Models: PP26L

1 248
Download 248 pages 18.8 Kb
Page 185
Image 185

Replacing a WWAN Card

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card.

NOTICE: To avoid damage to the WWAN card, never place cables under the card.

1Insert the WWAN card connector into the system board connector labeled "WWAN" at a 45-degree angle by aligning the notch on the WWAN card to the slot on the system board connector.

2Press down the other end of the WWAN card and tighten the screw securing the card to the system board.

3Connect the appropriate antenna cables to the WWAN card you are installing.

Connect the white striped cable to the connector on the card marked with a white triangle. Connect the black striped cable to the connector on the card marked with a black triangle.

4Secure unused antenna cables in the protective mylar sleeve.

5Replace the keyboard (see "Replacing the Keyboard" on page 173).

6Replace the central control cover (see "Replacing the Central Control Cover" on page 171).

Adding and Replacing Parts

185

Page 185
Image 185
Dell PP26L owner manual Replacing a Wwan Card, 185