1

3

2

1

optical drive

2

locking screw

3

notch

Replacing the Optical Drive

1Slide the optical drive into the bay.

2Replace and tighten the locking screw.

Central Control Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.

170

Adding and Replacing Parts

Page 170
Image 170
Dell PP26L owner manual Central Control Cover, Replacing the Optical Drive, 170