Dell PP26L owner manual Removing the Memory Module, 174

Memory

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

You can increase your computer memory by installing memory modules on the system board. See "Specifications" on page 203 for information on the memory supported by your computer. Install only memory modules that are intended for your computer.

NOTE: Memory modules purchased from Dell are covered under your computer warranty.

Your computer has two user-accessible SODIMM sockets, DIMM A and DIMM B accessed from the bottom of the computer.

NOTICE: If your computer has only one memory module, install the memory module in the connector labeled “DIMMA.”

NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMMA” before you install a module in the connector labeled “DIMMB.”

Removing the Memory Module

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

1Follow the procedures in "Before You Begin" on page 163.

2Turn the computer over.

3Loosen the captive screws from the memory module cover.

4Lift the memory module cover and set it aside.

174

Adding and Replacing Parts