Delta Electronics VFD-XXXE quick start Summary of Parameter Settings, Group 0 User Parameters

Terminal	Terminal Function		Factory Settings (NPN mode)
Symbol				ON: Connect to DCM
			Maximum 48VDC, 50mA
			Refer to Pr.03.01 for programming
			MO1-DCM		Max: 48Vdc
					50mA
MO1	Multi-function Output 1			Mo1
	(Photocoupler)
				MCM
				internal circuit
MCM	Multi-function output common		Common for Multi-function Outputs
+10V	Potentiometer power supply		+10VDC 3mA
	Analog voltage Input		Impedance:	47kΩ
	+10V	AVI circuit
			Resolution:	10 bits
			Range:	0 ~ 10VDC =
AVI	AVI			0 ~ Max. Output Frequency
				(Pr.01.00)
			Selection:	Pr.02.00, Pr.02.09, Pr.10.00
	ACM	internal circuit	Set-up:	Pr.04.11 ~ Pr.04.14
ACM	Analog control signal		Common for AVI, ACI, AFM
	(common)
	Analog current Input		Impedance:	250Ω
	ACI circuit
	ACI		Resolution:	10 bits
ACI			Range:	4 ~ 20mA =
				0 ~ Max. Output Frequency
				(Pr.01.00)
			Selection:	Pr.02.00, Pr.02.09, Pr.10.00
	ACM internal circuit		Set-up:	Pr.04.15 ~ Pr.04.18, 04.19~04.23
	Analog output meter		0 to 10V, 2mA
	ACM circuit
		AFM	Impedance:	20kΩ
AFM		0~10V	Output current	2mA max
			Resolution:	8 bits
		potentiometer
		Max. 2mA	Range:	0 ~ 10VDC
			Function:	Pr.03.03 to Pr.03.04
	internal circuit ACM
NOTE: Control signal wiring size: 18 AWG (0.75 mm2) with shielded wire.
Summary of Parameter Settings
: The parameter can be set during operation.					Factory
Pr.	Explanation		Settings			NOTE
					Setting
		Group 0 User Parameters
00.00	Identity Code of the Read-only				##
	AC motor drive

English- 10