C. PNP mode without external power | D. PNP mode with external power | |
NPN | NPN | |
Sw1 | ||
Sw1 | ||
| ||
PNP | PNP | |
| ||
Factory | Factory | |
setting | setting | |
| + | |
| 24 | |
| Vdc - |
Figure 5 RJ-45 Pins Definition for VFD*E*C Models
| PIN | Signal | Description |
|
| 1 | CAN_H | CAN_H bus line (dominant high) |
|
| 2 | CAN_L | CAN_L bus line (dominant low) |
|
| 3 | CAN_GND | Ground / 0V /V- |
|
| 4 | SG+ | 485 communication |
|
| 5 | SG- | 485 communication |
|
| 7 | CAN_GND | Ground / 0V /V- |
|
Description of the Digital Keypad KPE-LE02 (Optional)
1 | 3 |
| 2 |
4 | 6 |
| 5 |
7 | 8 |
1Status Display
Display the driver's current status.
2LED Display
Indicates frequency, voltage, current, user defined units and etc.
3Potentiometer
For master Frequency setting.
4RUN Key
Start AC drive operation.
5UP and DOWN Key
Set the parameter number and changes the numerical data, such as Master Frequency.
6MODE
Change between different display mode.
7STOP/RESET
Stops AC drive operation and reset the drive after fault occurred.
8ENTER
Used to enter/modify programming parameters
English- 6
