Delta Electronics VFD-XXXE quick start Group 2 Operation Method Parameters, AVI2

	Pr.	Explanation	Settings	Factory	NOTE
				Setting
		Mid-Point	0.10 to 600.0 Hz
01.40		Frequency (Fmid)		1.50
		(Motor 3)
01.41		Mid-Point Voltage	115V/230V series: 0.1V to 255.0V	10.0
		(Vmid) (Motor 3)	460V series: 0.1V to 510.0V	20.0
01.42		Minimum Output	0.10 to 600.0 Hz	1.50
		Frequency (Fmin)
		(Motor 3)
01.43		Minimum Output	115V/230V series: 0.1V to 255.0V	10.0
		Voltage (Vmin)	460V series: 0.1V to 510.0V	20.0
		(Motor 3)
		Group 2 Operation Method Parameters
			0: Digital keypad UP/DOWN keys or Multi-
			function Inputs UP/DOWN. Last used
			frequency saved.
		Source of First	1: 0 to +10V from AVI
			2: 4 to 20mA from ACI or 0 to +10V from	1
02.00		Master Frequency
			AVI2
		Command
			3: RS-485 (RJ-45)/USB communication
			4: Digital keypad potentiometer
			5: CANopen communication
			For VFD*E*C models, the factory setting is	5
			0: Digital keypad
			1: External terminals. Keypad STOP/RESET
			enabled.
			2: External terminals. Keypad STOP/RESET
		Source of First	disabled.	1
			3: RS-485 (RJ-45)/USB communication.
02.01		Operation
			Keypad STOP/RESET enabled.
		Command
			4: RS-485 (RJ-45)/USB communication.
			Keypad STOP/RESET disabled.
			5: CANopen communication. Keypad
			STOP/RESET disabled.
			For VFD*E*C models, the factory setting is	5
			0: STOP: ramp to stop; E.F.: coast to stop
02.02		Stop Method	1: STOP: coast to stop; E.F.: coast to stop	0
			2: STOP: ramp to stop; E.F.: ramp to stop
			3: STOP: coast to stop; E.F.: ramp to stop
		PWM Carrier
02.03		Frequency	1 to 15kHz	8
		Selections
		Motor Direction	0: Enable forward/reverse operation
02.04			1: Disable reverse operation	0
		Control
			2: Disabled forward operation

English- 14