Delta Electronics VFD-XXXE quick start Group 9 Communication Parameters

	Pr.	Explanation	Settings	Factory	NOTE
				Setting
08.17		Auto Energy Saving	0: Disable	0
			1: Enable
			0: AVR function enable
08.18		AVR Function	1: AVR function disable	0
			2: AVR function disable for decel.
			3: AVR function disable for stop
08.19		Software Brake	115V / 230V series: 370.0to 430.0V	380.0
		Level	460V series: 740.0 to 860.0V	760.0
		Compensation	0.0~5.0
08.20		Coefficient for Motor		0.0
		Instability
08.21		OOB Sampling Time	0.1 to 120.0 sec	1.0
08.22		Number of OOB	00 to 32	20
		Sampling Times
08.23		OOB Average	Read only	#.#
		Sampling Angle
08.24		DEB Function	0: Disable	0
			1: Enable
08.25		DEB Return Time	0 to 250 sec	0
		Group 9 Communication Parameters
09.00		Communication	1 to 254	1
		Address
			0: Baud rate 4800bps
09.01		Transmission Speed	1: Baud rate 9600bps	1
			2: Baud rate 19200bps
			3: Baud rate 38400bps
			0: Warn and keep operating
09.02		Transmission Fault	1: Warn and ramp to stop	3
		Treatment	2: Warn and coast to stop
			3: No warning and keep operating
09.03		Time-out Detection	0.1 ~ 120.0 seconds	0.0
			0.0: Disable
			0: 7,N,2 (Modbus, ASCII)
			1: 7,E,1 (Modbus, ASCII)
			2: 7,O,1 (Modbus, ASCII)
			3: 8,N,2 (Modbus, RTU)
			4: 8,E,1 (Modbus, RTU)
09.04		Communication	5: 8,O,1 (Modbus, RTU)	0
		Protocol	6: 8,N,1 (Modbus, RTU)
			7: 8,E,2 (Modbus, RTU)
			8: 8,O,2 (Modbus, RTU)
			9: 7,N,1 (Modbus, ASCII)
			10: 7,E,2 (Modbus, ASCII)
			11: 7,O,2 (Modbus, ASCII)

09.05Reserved

09.06Reserved

09.07	Response Delay	0 ~ 200 (unit: 2ms)	1
	Time

English- 25