Delta Electronics VFD-XXXE quick start Up/Down

	Pr.	Explanation	Settings	Factory	NOTE
				Setting
			0: Disable. Operation status is not changed
			even if operation command source Pr.02.01
			is changed.
			1: Enable. Operation status is not changed
			even if operation command source Pr.02.01
02.05		Line Start Lockout	is changed.	1
			2: Disable. Operation status will change if
			operation command source Pr.02.01 is
			changed.
			3: Enable. Operation status will change if
			operation command source Pr.02.01 is
			changed.
			0: Decelerate to 0 Hz
02.06		Loss of ACI Signal	1: Coast to stop and display “AErr”	1
		(4-20mA)	2: Continue operation by last frequency
			command
			0: by UP/DOWN Key
02.07		Up/Down Mode	1: Based on accel/decel time	0
			2: Constant speed (Pr.02.08)
			3: Pulse input unit (Pr.02.08)
		Accel/Decel Rate of
		Change of
02.08		UP/DOWN	0.01~10.00 Hz	0.01
		Operation with
		Constant Speed
			0: Digital keypad UP/DOWN keys or Multi-
			function Inputs UP/DOWN. Last used
			frequency saved.
		Source of Second	1: 0 to +10V from AVI	0
			2: 4 to 20mA from ACI or 0 to +10V from
02.09		Frequency
			AVI2
		Command
			3: RS-485 (RJ-45)/USB communication
			4: Digital keypad potentiometer
			5: CANopen communication
			For VFD*E*C models, the factory setting is	5
		Combination of the	0: First Master Frequency Command
			1: First Master Frequency Command+
		First and Second
02.10			Second Master Frequency Command	0
		Master Frequency
			2: First Master Frequency Command -
		Command
			Second Master Frequency Command
02.11		Keypad Frequency	0.00 to 600.0Hz	60.00
		Command
		Communication	0.00 to 600.0Hz
02.12		Frequency		60.00
		Command
		The Selections for	0: Save Keypad & Communication
		Saving Keypad or	Frequency
02.13		Communication	1: Save Keypad Frequency only	0
		Frequency	2: Save Communication Frequency only
		Command

English- 15