Delta Electronics VFD-XXXE Group 1 Basic Parameters, For VFD*E*C models, the factory setting is

		Pr.	Explanation	Settings	Factory	NOTE
					Setting
00.12			50Hz Base Voltage	0: 230V/400V	0
			Selection	1: 220V/380V
				Group 1 Basic Parameters
01.00			Maximum Output	50.00 to 600.0 Hz	60.00
			Frequency (Fmax)
			Maximum Voltage
01.01			Frequency (Fbase)	0.10 to 600.0 Hz	60.00
			(Motor 0)
01.02			Maximum Output	115V/230V series: 0.1V to 255.0V	220.0
			Voltage (Vmax)	460V series: 0.1V to 510.0V	440.0
			(Motor 0)
01.03			Mid-Point Frequency	0.10 to 600.0 Hz	1.50
			(Fmid) (Motor 0)
01.04			Mid-Point Voltage	115V/230V series: 0.1V to 255.0V	10.0
			(Vmid) (Motor 0)	460V series: 0.1V to 510.0V	20.0
			Minimum Output
01.05			Frequency (Fmin)	0.10 to 600.0 Hz	1.50
			(Motor 0)
01.06			Minimum Output	115V/230V series: 0.1V to 255.0V	10.0
			Voltage (Vmin)
				460V series: 0.1V to 510.0V	20.0
			(Motor 0)
01.07			Output Frequency	0.1 to 120.0%	110.0
			Upper Limit
01.08			Output Frequency	0.0 to100.0 %	0.0
			Lower Limit
	01.09		Accel Time 1	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
	01.10		Decel Time 1	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.11			Accel Time 2	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
				For VFD*E*C models, the factory setting is 1.0
01.12			Decel Time 2	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
				For VFD*E*C models, the factory setting is 1.0
01.13			Jog Acceleration	0.1 to 600.0 / 0.01 to 600.0 sec	1.0
			Time
01.14			Jog Deceleration	0.1 to 600.0 / 0.01 to 600.0 sec	1.0
			Time
	01.15		Jog Frequency	0.10 Hz to Fmax (Pr.01.00) Hz	6.00
				0: Linear Accel/Decel
			Auto acceleration /	1: Auto Accel, Linear Decel
01.16			deceleration (refer	2: Linear Accel, Auto Decel	0
			to Accel/Decel time	3: Auto Accel/Decel (Set by load)
			setting)	4: Auto Accel/Decel (set by Accel/Decel
				Time setting)
01.17			Acceleration S-	0.0 to 10.0 / 0.00 to 10.00 sec	0.0
			Curve
01.18			Deceleration S-	0.0 to 10.0 / 0.00 to 10.00 sec	0.0
			Curve
01.19			Accel/Decel Time	0: Unit: 0.1 sec	0
			Unit	1: Unit: 0.01 sec
01.20			Delay Time at 0Hz	0.00 to 600.00 sec	0.00
			for Simple Position

English- 12