Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

GXM Satellite RadioH

Symptom

 

 

Cause

 

 

 

 

Countermeasure

 

 

Page

“LOADING” is

• The XM Mini-Tuner is acquiring

• This message should disappear

60

displayed in the

audio

or program

information

in a few seconds in good signal

 

XM mode.

from the XM satellite signal. This

conditions. If you see this

 

 

message can also occur in weak

message often,

reposition

the

 

 

XM

signal

conditions.

(Note

XM antenna for better signal

 

 

that the AVP-A1HDCI may not

reception.

 

 

 

 

 

respond to some buttons for XM

 

 

 

 

 

 

 

while this message is displayed.)

 

 

 

 

 

 

“NO SIGNAL” is

• The

XM Mini-Tuner is not

• Check for antenna obstructions

60

displayed in the

receiving the XM satellite signal.

and reposition the XM antenna

 

XM mode.

Something

may

be

blocking

to get better signal reception.

 

 

the XM antenna’s view of the

See instructions

supplied

with

 

 

satellites or the antenna is not

the XM Mini-Tuner and Dock for

 

 

properly aimed.

 

 

 

antenna installation information.

 

 

 

 

 

“OFF AIR” is

• You selected an XM channel is

• Check back later; in the mean

59, 60

displayed in the

not currently broadcasting.

time, select another channel.

 

XM mode.

 

 

 

 

 

 

 

 

 

 

 

 

“UP DATING” is

• You selected an XM channel that

• Consult the latest channel guide

displayed in the

is blocked or cannot be receive

at

www.xmradio.com

for

the

 

XM mode.

with

your

XM

subscription

current list of channels. For

 

 

package.

 

 

 

 

information on

receiving

this

 

 

 

 

 

 

 

 

channel, visit www.xmradio.com

 

 

 

 

 

 

 

 

or contact XM Satellite Radio at

 

 

 

 

 

 

 

 

1-800-967-2346.

 

 

 

 

“XM - - - ” is

• The

selected channel

is not

• Consult the latest channel guide

displayed in the

available. The channel may have

at

www.xmradio.com

for

the

 

XM mode.

been reassigned to a different

current list of channels. For cases

 

 

channel number. This

message

of a new radio or a radio that has

 

 

may occur initially with a new

not received XM’s signal for an

 

 

radio or a radio that has not

extended period, allow the radio

 

 

received XM’s signal for an

to receive the XM satellite signal

 

 

extended period.

 

 

 

for at least 5 minutes and then

 

 

 

 

 

 

 

 

try to select the channel again.

 

Specifications

nAudio section

• Analog

 

 

Input sensitivity / Input impedance:

RCA Pre output (unbalanced) : 200 mV / 47 kΩ/kohms

 

XLR Pre output (balanced)

: 400 mV / 100 kΩ/kohms

Frequency response:

10 Hz ~ 100 kHz +1, –3 dB (DIRECT mode)

S/N:

102 dB (IHF–A weighted, DIRECT mode)

Distortion:

0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)

Rated output:

RCA Pre output (unbalanced) : 1.2 V

 

XLR Pre output (balanced)

: 2.4 V

• Digital

 

 

D/A output:

Rated output — 2 V (at 0 dB playback)

 

Total harmonic distortion — 0.005 % (1 kHz, at 0 dB)

 

Dynamic range — 110 dB

 

Digital input:

Format — Digital audio interface

• Phono equalizer (PHONO input — REC OUT)

 

Input sensitivity:

2.5 mV

 

RIAA deviation:

±1 dB (20 Hz to 20 kHz)

 

S/N:

74 dB (A weighting, with 5 mV input)

Rated output:

150 mV

 

Distortion factor:

0.03 % (1 kHz, 3 V)

 

nVideo section

• Standard video connectors

 

 

Input / output level and impedance:

1

Vp-p, 75 Ω/ohms

Frequency response:

5

Hz ~ 10 MHz — +0, –3 dB (when video convert set to “OFF”)

S-Video connectors

Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

 

C (color) signal — 0.286 Vp-p, 75 Ω/ohms

Frequency response:

5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to “OFF”)

Color component video connector

Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

 

PB / CB signal — 0.7 Vp-p, 75 Ω/ohms

 

PR / CR signal — 0.7 Vp-p, 75 Ω/ohms

Frequency response:

5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to “OFF”)

nTuner section

 

[FM]

[AM]

 

(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15W)

 

Receiving Range:

87.5 MHz ~ 107.9

MHz

520 kHz ~ 1710 kHz

Usable Sensitivity:

1.0 µV (11.2 dBf)

 

19 µV

50 dB Quieting Sensitivity:

MONO

1.6 µV

(15.3 dBf)

 

 

STEREO

23 µV (38.5 dBf)

 

S/N (IHF-A):

MONO

77 dB

 

 

 

STEREO

72 dB

 

 

Total harmonic Distortion (at 1 kHz):

MONO

0.2 %

 

 

 

STEREO

0.3 %

 

 

103