Operations

1Connect AVP-A1HDCI and POA-A1HDCI with the control link cable.

b The control link cable is included with the POA-A1HDCI.

b AVP-A1HDCI can be connected and control to up to 2 POA- A1HDCI units.

Refer to the POA-A1HDCI user’s manual for how to connect.

2Set the POA-A1HDCI’s control selector switch to “AVP”.

3Set the POA-A1HDCI’s mode select switch according to the number of POA-A1HDCI units you are

connecting.

When connecting 1 unit : “1”

When connecting 2 units : 1st unit “1”, 2nd unit “2” b Refer to the POA-A1HDCI owner’s manual for details.

4Switch the AVP-A1HDCI and POA-A1HDCI power on.

5Depending on the number of POA-A1HDCI units to be connected, set GUI menu “Option Setup” – “POA Setting” – “POA LINK” to either “ON (Single)” or “ON (Dual)” (vpage 39).

6Use GUI menu “Option Setup” – “POA Setting”

– “LINK Check” to check the connection.

Connecting Equipment with HDMI connectors

With HDMI connections, the video and audio signals can be transferred with a single cable.

DVD

player Monitor

)%.*

)%.*

065

*/

Compatible audio

Details

Discs

format

(examples)

 

2-channel linear PCM

2ch 32-192 kHz

CD, DVD-Video,

16/20/24 bits

DVD-Audio

 

 

 

Multi-channel linear

8ch 32-192 kHz

DVD-Audio

PCM

16/20/24 bits

 

 

 

 

Dolby Digital, DTS

Bitstream

DVD-Video

 

 

 

 

2/5.1ch

 

DSD

2.8224 MHz

SACD

 

1 bit

 

 

 

 

Dolby Digital Plus,

 

HD DVD,

Dolby TrueHD,

Bitstream

Blu-ray Disc

DTS-HD

 

 

 

 

 

 

Copyright protection system (HDCP)

In order to play the digital video and audio signals of a DVD- Video or DVD-Audio disc using HDMI/DVI connections, both the connected DVD player and monitor must be equipped for a copyright protection system called “HDCP” (High-bandwidth Digital Content Protection). HDCP is a copy protection technology consisting of data encoding and mutual identification of the devices.

The AVP-A1HDCI is HDCP-compatible. For details on the DVD player or monitor you are using, refer to its operating instructions.

When connecting with an HDMI/DVI converter cable

(adapter)

• HDMI video signals are theoretically compatible with the DVI

format.

When connecting to a monitor, etc., equipped with a DVI-D

connector, connection is possible using an HDMI/DVI converter

cable, but depending on the combination of components in some

cases the video signals will not be output.

• When connecting using an HDMI/DVI converter adapter, the video

signals may not be output properly due to poor connections with

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

•By default, HDMI sound is output from the speaker of the power amp connected to AVP-A1HDCI.

•To output the sound from the TV, make the settings at GUI menu “Manual Setup” – “HDMI Setup” – “Audio” – “TV” (vpage 32).

b The AVP-A1HDCI is supported to the feature of HDMI listed below.

•30 and 36 bit Deep Color

•xvYCC

•Auto Lipsync Correction

the connected cable, etc.

12